Novelties 2012
|
AGRALEX Chemical seed dresser Hanka with capacity of 3-15t/h is designed to operate in a fully automated process line. Bucket and belt elevators are designed for vertical and horizontal transportation of grain, seeds, granulates, pulverized materials and other granular materials, with low energy consumption in difficult industrial conditions even up to 600 t/h.
|
 |
|
AGRI CON EZ-Pilot is somewhere between Driving Assistant EZ-Steer and fully automated Autopilot system. EZ-Pilot is featured by a compact structure. Its unique design allows the use of an original tractor driving wheel with adjustable steering column which does not mask the tractor cockpit. The system is provided with a new site correction system - T3, reacting to unevenness of the field during the tractor operation. The new system may operate under supervision of proven terminals - CFX-750 or FMX. Accuracy of driving is 20-30 cm (DGPS) and up to 2-3 cm (RTK). |
 |
|
N-Sensor of the most recent generation. The new model differs from the preceding one both in appearance and possibilities. The following was developed: Software: Precision Farming Box with 19 integrated and agronomic checked algorithms (10 algorithms for nitrogen fertilizing, 6 for growth regulators, 1 for desiccation, 1 for basic fertilizing and 1 for variable sowing)
Data management:
|
 |
|
N-Tester – the new model combines the advantages of the previous, popular tool with implemented variety corrective sheets, thus allowing immediate display of the recommended fertilizer dose for the specific grain variety. Corrective tables may be updated by the users themselves by downloading them from the producer's website and sending via the N-Tester® USB port. Agri Con, distributor of N-Tester, provides the facility with a very useful spreadsheet allowing recording measurements (taken every 3-5 days during the fertilizing period) and monitoring the nitrogen balance directly in the plant. It is then possible to not only plan the dose but also the date of application The use of N-Tester guarantees the best financial result in nitrogen fertilising – the input : profit ratio, protects against laying and minimizes the nitrogen balance in the soil.
|
 |
|
AGRIFAC Condor ClearancePlus – self-propelled sprayer Agrifac Condor with additionally increased clearance ClearancePlus – increased height of as mush as 200 cm from the base – ensures effective solution for crop protection activities for such crops as asparagus, sunflower and maize. The required stability is provided by the chassis suspension system StabiloPlus, which has been braced and adjusted accordingly to working widths - stepless adjustment between 190 and 270 cm. For road driving purposes the StabiloPlus suspension may be quickly and easily lowered, so as to safely travel from field to field with the centre of gravity low and normal height of the facility!
|
 |
|
AGROMASZ SR300 drill seeder – a drill seeder with a working width of 3 m, SR300 model; as standard it is equipped with hoe coulters, multi-purpose divided seeding wheels, 6.00-16 tires, a hydraulic marker roller, loading platform with steps, continuously variable transmission, inner grid of the box, chutes for the circulation seeding test, seed box agitator and flaps to prevent coulters clogging. 550 l drill seeder’s loading box capacity, stepless adjusted coulters pressure. As an option, we also offer electrical technological paths.
|
 |
|
AGROTECHNIK Twin wheels and couplers: for field work where it is desirable to reduce pressure to maximally protect soil, and increase the efficiency of work performed (by reducing wheel spin and fuel consumption), and when increasing the effective pulling force of tractors, harvesters and agricultural machinery, forestry and industrial applications is required. Available in all sizes for all types of tractors, harvesters, farm and industrial machinery. Available applications: narrow + narrow wide + narrow (and the opposite) wide + wide
|
 |
|
AGROTOP SATOR harvester – during construction work on our harvester we took into account the suggestions and advice we obtained from farmers – carrot producers. Features distinguishing our harvester: Design of the digger and the way of its fixing allows easy adjustment of the lead or delay in carrot digging. Design of the servomotor handle (third fixing point) allows fixing the machine on tractors of any brand. Difference in the length of belts shifting carrots for heading and disposal of stems is designed to ensure continuous work without the need to clean the space between the heading knives and the belts. Lateral adjustment of top (driving) belt pulley spacing is designed to precisely determine the place of stems disposal, hence assistance in disposal of stem residues from the belts and prevents clogging of critical spots in the harvester.
|
 |
|
AGROYOUMIS Annushka – early variety of soy which has no equivalent in the European Union: vegetation period is 90-100 days, plant height – 80-110cm, height of occurrence of first pods – 12-15cm, high cropping potential (above 3t/ha). Soy of Annushka variety is not genetically modified and is adjusted to cultivation also in organic farms.
|
|
|
ALBUZ BOTT Two new kinds of spray nozzles for fruit-growers – it is an ALBUZA’s proposal for the coming 2012 season. The ATR 60 hollow cone nozzle and ATI 60. The both products have a reduced liquid outflow angle (so far – the angle of 80 degrees) what directs the PP stream extremely precisely. Though these products have been prepared among others for the new types of sprayers (designed with a view of spray precision, better stream control, automatic deactivation of individual spray nozzles) they prove excellently useful in the standard sprayers as well. An additional advantage includes an improvement of working liquid stream range what results from the outflow angle reduction. The use of 60 degree sprayers constitutes a new trend in fruit culture. For the first time the ATI 60 spray nozzle was produced according to the ISO colour code.
|
 |
|
BAG POLSKA ROmiLL S600 roller mill is designed for grinding dry and moist grain. It is a stationary machine powered by an 18.5 kW motor. Grinding is carried out by two 600 mm long rollers. This device produces pellet fraction corresponding to the fraction obtained from the hammer mills equipped with sieves with a 3-4 mm mesh size, while reducing dusty fractions not exceeding 5% and up to 50% lower electricity consumption. Roller mill is used mainly in small and medium-sized farms. It is used for the preparation of daily animal feed. Depending on the type and the desired pellet fraction the machine’s performance ranges from 3.0 to 9.0 t/h.
|
 |
|
CASE IH Magnum 340 Efficient Power - The new Tier4 engine (SCR) Max. power 375KM and max. torque 1671Nm. Hydraulics - flow capacity up to 274 l/min. and HPL max lift load to 10200kg. Automatic Productivity Management system (APM) optimizes efficiency of the machine, automatic field and road mode in standard as well as EPM system which delivers additionally up to 37KM. The new large screen monitor AFS 700. The Multicontroller armrest with all tractor's functions common in every CaseIH tractor within high horse power range. Maintenance interval - 600h.
|
 |
|
Farmall 55 C - FPT Engine 3,2Litre. 4 cylinders. Rated Power 41 kW/55 hp.35% torque rise. Transmission 12x12 Power Shuttle. Lowest creeper speed 123 m/h. Fuel tank capacity 90l. Return radius 7,6 m. Visco fan. Air suspension seat. Air heater. Electro hydraulic 4WD. 2 remotes 4 couplers. Swivel German hitch, drawbar hole, linkage drawbar. Air conditioning.
|
 |
|
Maxxum 125 Multicontroller EP - FPT Engine 6728 Tier 4. 6 cylinders 4 valves, Bosch Common rail pomp, turbocharger and intercooler. Max Boost Power 121 kW/ 165 hp. Transmission 16x16 Semi Power Shift. Fuel tank capacity 227 l. 3 rear remotes, 6 couplers. Cab noise level 71 dB(A). HPL max load lift to 7864 kg. Front suspended axle. Ergonomic operating panel (Multicontroller).
|
 |
|
Kompakt 55 S - FPT Engine 3,2Litre. 4 cylinders. Rated Power 41 kW/55 hp.35% torque rise. Transmission 12x12 Power Shuttle. Lowest creeper speed 123 m/h. Fuel tank capacity 90l. Return radius 7,6 m. Visco fan. Air suspension seat. Air heater. Electro hydraulic 4WD. 2 remotes 4 couplers. Swivel German hitch, drawbar hole, linkage drawbar. Air conditioning.
|
 |
|
Profi 6140 Ecotech - FPT Engine 6728 Tier 4. 6 cylinders 4 valves, Bosch Common rail pomp, turbocharger and intercooler. Max Boost Power 129 kW/ 175 hp. Transmission 16x16 Semi Power Shift. Fuel tank capacity 227 l. 3 rear remotes, 6 couplers. Cab noise level 71 dB(A). HPL max load lift to 7864 kg. Front suspended axle. Ergonomic operating panel (Multicontroller). |
 |
|
CLAAS AXION 900 series – tractors with the most advanced technology. As of 2012 the product family of CLAAS will be supplemented with a new series of large tractors. Four models called AXION 920, 930, 940 and 950 provided with maximum power of 320, 350, 380 and 410 hpm determined under ECE R 120, will add to the broad assortment of tractors offered by this manufacturer and will fill in the gap between the proven AXION 800 (164 - 260 hpm) series and the multitask XERION 3300 to 5000 tractors with 4x4 (330 - 530 hpm) drive. All XERION series tractors with 4x4 drive offered by CLAAS were designed for work in European conditions and their 2.15 m high and 90 cm wide wheels meet all the requirements of the traffic regulations.
|
 |
|
EXPOM New model of TYTAN hydraulically-foldable cultivation roller - equipped with new Cambridge-type rings (diameter 600 mm). The more the ring diameter the lower the rolling resistance, i.e. the rolling process can be implemented with higher speeds and this solution ensures higher pressure on the surface area unit.
|
 |
|
FARMET Chisel Cultivators Triolent. A carried three-row cultivator for stubble-braking and ploughing to the maximum depth of 35cm. An excellent effect of soil aeration and mixing, 6 types of rollers, spring protection with high release power, solid frame made using the eXtra STEEL line® technology. Main machine advantages:
|
 |
|
FORTIS TECHNOLOGY FortisTank 5000 l is an optimal solution for the storage and internal distribution of Diesel Oil. The tank was developed in collaboration with our customers and was based on years of experience. FORTIS TANK meets all the European Union requirements and standards regarding the safe storage of fuels. The reinforced two-shell Strong Musculare structure gives the highest guarantees of safe performance. See details at www.zbiornikidopaliw.pl
|
 |
|
GEM-EKO GEM-Series RTD ECO MINI Hydraulic Briquetting machines: RTD Series versatile hydraulic briquetting machines. Preparation of briquette from materials like sawdust, wood chips, straw, paper and other cellulose-containing materials or having physical properties for compression. Briquetting is carried out without any binders and only by exerting very high pressure of a hydraulic cylinder for appropriate portions of the automatically dispensed material. Humidity of wood should be within 8-12% and should not exceed 17%, with approx. 1-3 mm fraction. These conditions, however, may change depending on the briquetted material – for example, for paper and straw fraction may be significantly greater by even 50mm, and the humidity by around 25-30%. Parameters of the BRT MINI briquetting machines • briquette random length depends on the material’s fragmentation • compact size • can be ordered in a mobile variant on wheels (useful in the garden) • easy to use • hopper with gearbox and reducer • construction on two hydraulic cylinders • very simple and reliable design • cheapest on the market briquetting machine for high quality briquette production Technical details of the BRT MINI 4: Dimensions: 1650 x 600x1400mm Inlet hopper diameter: Ø 500mm Hopper height: 500mm Power consumption: 2kW/h Hydraulic oil: 15 L Briquette diameter: 35-40mm Output: up to 25kg/h Colour: GEM-EKO Standard RAL 7000 Supply: 400 V +/- 5 % / 50 Hz Weight: approx. 120kg
|
 |
|
GRASDORF Twin wheels for Quads and other ATV vehicles. The novel way of connecting CLIC wheels in different vehicles with single wheel mass of about 35 kg. Ideal solution for ATV vehicles, Quads, and off-road vehicles, small tractors, self-propelled mowers and many other. The CLICK twin wheels do not only ensure better towing power, ability to drive in difficult conditions, but also safety on slopes and turns.
|
 |
|
GREGOIRE-BESSON X shaped ACERO disk harrow. Acero is a new disk harrow by Gregoire-Besson with a heavy roller of Emopak type for tractors with power of 120 – 170 hpm.
|
 |
|
Disk unit with teeth Gregoire-Besson COMBIMIX - this is a facility which combines the operation of teeth, disks and roller. The machine is suspended with two working widths: 3.00 or 3.50 m. At the front end there is a row of teeth (well known by farmers, type Discodent), with bolt or hydraulic protection (as option). The teeth may work to the depth of 30 cm. Two rows of disks are located behind the teeth – disks have diameters of 630 mm and thickness of 6 mm. The disks are coupled in pairs with rubber protection against stones. After the soil is cut by the front teeth it will be further cut and mixed with post harvest residues by the disks. At the end the heavy Emopak roller is installed, diameter of 740 mm, which will level the soil and prepare it for sowing. The roller is hydraulically foldable for transport at the back of the machine. The roller also has hydraulic adjustment of working depth. Combimix is designed for post harvest cultivation and primarily for preparation of soil for sowing when agro-technical deadlines are short. Because of the combination teeth, disks, heavy roller, Combimix performs very well then the soil is very moist. Combimix power demand is 180 to 220 hpm.
|
|
|
Self-propelled Berthoud Raptor sprinklers may be equipped with a tank of : 3200l, 4200l, 5200 litres and the working beam width of 24 to 42 metres. Field beams of Axiale type and triangular design, due to central suspension of the beam, application of springs which maintain equilibrium between the movable and fixed beams, and application of dampers, the beam is always stable and parallel to any subgrade. Berthoud proposes a rotary, double turbine pump for working liquid with yield of 550 l/min (resistant to RSM). Sprinkling yield control (computer DP tronic), constant dose independent from the driving speed. Raptor is equipped with a 6 cylinder Deutz engine with turbocharging, power depending on the capacity of the working liquid tank: 180, 200 or 240 hpm. Maximum speed 40 km/h. Each wheel has an independent drive, 3 modes of wheel operation (torsional front axle, torsional front and rear axle, dog step). Pneumatic suspension of wheel axles. Berthoud Raptor may be equipped (as an option) additionally with a system for automatic section closing by GPS and detectors which will maintain a constant height of the beam above the crop.
|
 |
|
HAGO GRAIN LOSS MONITOR (with sensors) - Universal and flexible design makes our sensors usable with any model of the combine. Use of the best components makes the meter very precise and provide an excellent level of comfort and control for machine operator. Complete device consists monitor (meter) and sensors on the sieves and straw walkers. Sensors offer many benefits and savings which has a big influence in profitability of harvests and allows reduction in losses to a minimum. The sensors and monitor are ideal for harvests of wide range of grains - from rape to corn.
|
 |
|
HEADER EXTENSIONS FOR RAPESEED - Rapeseed harvest time is too short, so the collection must be done very efficiently. Big problem are the falling seeds. Harvesting rapeseed to early means lower yields and low oiliness. To limit losses to a minimum during the harvest while choosing an appropriate period for shearing, it is essential to use the header expansion for rapeseed with active splitter for fief. We provide tables to all types of western combine-harvesters like: CLAAS, JOHN DEERE, NEW HOLLAND, CASE, FENDT, MASSEY FERGUSON, LAVERDA and other.
|
 |
|
HYDRO-MASZ Lindner tractor – manufactured in a family factory in Kundl, in Tirol, the LINDNER tractors with power of 78 to 126 hpm, are featured by elaborate design and top workmanship. Designed for heavy duty tasks in difficult, mountainous conditions, they meet the requirements of the most demanding customers. Advantages of LINDNER tractors shall be acknowledged particularly by users who manage their farms based on green feed production.
|
 |
|
HYDROMETAL A new AT 40 loader is designed for the tractors ranging from 100 HP to 160 HP. It is an extension of AT series loader offer. The loader is distinguished by a modern and rigid construction. A hydraulic system of the loader is designed according to the all trends that prevail in Europe and in the world. Hydraulic pipes inside the frame, hydraulics elements such as solenoid valves and shock absorbers are built up under a solid casing that additionally strengthens the construction. Corrected angles of bucket gathering and dumping. The most important parameters:
|
 |
|
JOHN DEERE 6R series tractors – new models 6170R, 6190R and 6210R. The above models have power of 170, 190 and 210 hpm respectively. Engines provided in these tractors meet the requirements of the new Stage IIIB exhaust gas emission standard. Transmissions which may be applied in these machines: PowrQuad, AutoQuad and stepless transmission AutoPowr. The hydraulic system may reach the pump yield at the level of 155l/min in combination with the new geometry of the rear elevator provides for cooperation with really big machines. The new very comfortable cabin with excellent visibility may be amortized. Also the front axle (TLS) is amortized, thus improving the capacity of the machine and working comfort. Axle base of the tractors is 2.8m. New tractors are equipped with a new monitor CommandCenter 3, which cooperates with the AutoTrac, ISOBUS systems and may be optionally touch-type, thus allowing cooperation with a video camera.
|
 |
|
7R series tractors - 5 new models 7200R, 7215R, 7230R, 7260R and 7280R. These models have power of 200, 215, 230, 260 and 280 hpm respectively. The engine provided in these models meets the new exhaust gas emission standard Stage IIIB. In the two smaller models we may find John Deere engines, capacity 6.8l PSX (double turbocharging), whereas in the three larger models the engine capacity is 9l PSX (single turbocharging). Transmissions which may be applied in these machines: PowrQuad, AutoQuad and stepless transmission AutoPowr. In 7260R and 7280R models, transmission AutoPowr is standard. The hydraulic system may reach pump yield at 227l/min, combined with large mass of the tractor, may cooperate with really big machines. New, very comfortable cabin, perfect visibility may be amortized. Also the front axle (TLS) is amortized, thus improving the capacity of the machine and working comfort. New tractors are equipped with new monitor CommandCenter 3, which cooperates with AutoTrac, ISOBUS system and may be optionally touch-type, thus allowing cooperation with a video camera.
|
 |
|
8R series tractors – models 8260R, 8285R, 8310R, 8335R and 8360R are featured by low fuel consumption by PowerTech PSX engine, capacity 9 litres and 6 cylinders, ensuring high power and torque used for heavy duty field tasks and transport. The majority of accessories is the same as the current series 8R.
|
 |
|
New harvesters of W series and T series – provide a new level of grain harvesting capacity for larger farms and service providers. The largest active separation area on the market, smooth, continuous material flow, less harsh to grain and straw. With a completely new, more spacious cabin these harvesters set out new standards of comfort and convenience. They are also equipped with intelligent i-solutions, 6.8 or 9.0 litre John Deere PowerTech PSX engines which meet the Stage IIIB exhaust gas emission standard, with the advantages of geen efficiency technology for operator and owner of the machine.
|
 |
|
New harvesters of S series - the new series offers more models, the largest one of which has the most powerful engine which is currently available for harvesters, power 625 hpm (maximum power acc. to ECE R120). Other options and advantages: the new threshing and separation system ensured by a new rotor; system of active return of unthreshed part and adjustable guides on the rotor, new screens and clean grain receipt system, new drives and transmission options, new options for after harvest management, allowing cooperation with broader harvesting units; new cabin, controllers, displays and electro hydraulic system for greater comfort and control; plus larger grain containers, greater unloading speed and optional caterpillars designed especially for John Deere. Moreover, new telematic systems and intelligent solutions for better management and documentation, mean the greatest development in the 100 years of John Deere of harvesting technology, fully concentrated on European large crops of fine grain cultivars. These features are to provide the customers with greater productivity, reliability and control, as well as shipment of larger volumes of high quality grain to warehouses and improved management of after harvest residues.
|
 |
|
JOSKIN Drakkar is a volumetric trailer for shipping tasks. Novelty of the machine consists mainly in the unloading concept. Movable front wall is driven by a conveyor with winding belt. The box is provided with lateral scraping belts which allow uniform and precise unloading of the material. The load is actually taken out from the box.
|
 |
|
Cargo-TRACK is a multi-functional, 4 axle self-propelled vehicle, driven by a 450 hpm engine, allowing achievement of a speed of up to 80 km/h. The vehicle has two front axles and one rear torsional axle, ensuring exceptional manoeuvring ability in any site. Cargo-Track may use any of the Cargo system elements: cistern, volumetric trailer, dump trailer and spreader.
|
 |
|
KONGSKILDE EcoLine – new line of mechanical grain drills is an ideal solution for farms with small and medium areas. Major advantages: excellent flow of soil and plant remnants through the coulter beam, high precision of sowing regardless of the location of drill openers, precise seed dosing system drive ensured by "tractor" type tyre treads 7.00 x 12.
|
 |
|
KORBANEK Grain harvester Fendt 6335 C
|
 |
|
Engine Performance MF 7624 Engine characteristics MF 7624 - Max. hpm at rpm:1950 :235 (173) Engine - Model: AGCO SISU POWER e3 with SCR Transmission - Dyna-VT with Power Control: stepless with Active Stop and Dynamic Tractor Management Rear end elevator and hydraulics - Max lifting capacity: Kg 9,300 Adjustable hydraulics CCLS l/min/ bar 110
|
 |
|
Engine Performance MF 5430 Engine characteristics MF 5430 - Max. power@2000 rpm acc. to ISO KM 92, rated power@2200 rpm acc. to ISO KM 90 Engine - Model: Perkins Transmission - Dyna-4 16/16 with 4 ratios under load, Speedmatching function. Rear end elevator and hydraulics - Max lifting capacity: 4300 kg |
 |
|
Agricultural tractor Fendt 724 SCR Vario is the most powerful model in the new series 700. The tractor is furnished with a 6 cylinder Deutz engine, max. power 240 hpm with a SCR system, reducing the emissions of harmful exhaust gases into the environment and reducing fuel consumption. Gearbox: Vario, system TMS/TI, independent external hydraulics system – these are only few of the advantages of this tractor.
|
 |
|
KRAJ Focus T 1000/4 drive - Another version of the unit from the FOCUS group is the 4-metre FOCUS T version based on a semi-suspended system. So far, only the 3-metre version of Focus T drive has been manufactured. It has been appreciated on the market and farmers often inquired about the 4-metre version being a better solution for larger areas of land. The 4-metre structure with a stiff frame has been based on the 3-metre version. The seed box has been enlarged to 1000 dm3 (so far 700 dm3 in the 3-metre version), which ensures better capacity of the unit. The cultivation section comprises a cultivator equipped with two rows of 460 mm discs secured by rubber shock absorbers. The rear tyre roller (175x15) ensures correct soil packing and levelling in front of the disc coulters. The unit is also transported on the tyre roller. The unit pulled by means of the drawbar makes it possible to limit the tractor power demand to 120 HP (a similar unit in the suspended version would require a tractor ensuring approx. 180 HP). The mechanical-pneumatic sowing system used in FOCUS units ensures uniform sowing both on plains and hilly areas. The double-disc alternating self-cleaning coulters equipped with a packing-copying unit ensure accurate sowing on required depth.
|
 |
|
PLUS S 700 premium - The compact extendible PLUS units have recently been complemented with the PLUS S 700 premium version, i.e. a combined cultivator and seed drill unit added on the passive cultivator equipped with two rows of reinforced spring-loaded tines of the "SV” type and the CROSSKILL roller (diameter 510 mm). The new feature is the new cultivator type on which the seeder is mounted. A very short harrow with robust tines and a large-dimension roller ensures intensive crushing and compacting action in medium-heavy soils. The seeder mounted on the cultivator employs a traditional mechanical sowing system. It may be equipped with hoe coulters or one-disc coulters to be adjusted to soil conditions. The unit is standard equipped with supports for seeder removal which make it possible to disengage the system and operate only the cultivator. The compact design of the unit makes it possible to cultivate land by means of tractors with power exceeding 120 HP. The unit operating width is 3.0 m and the seed box capacity is max. 700 dm3.
|
 |
|
Focus Active 1000/3 drive - So far, the units mounted on active harrows have mostly required 6-cylinder tractors of min. power 140 HP for cultivating purposes. Thus if farmers owned smaller tractors, they were unable to purchase active units. For the purposes of these customers, we have designed a unit which may operate with 4-cylinder tractors of power 100-120 HP. A standard active harrow of the Cyklotiler type is additionally equipped with a pulling drawbar and rear tyre-packing roller used also to transport the unit. A 1000 dm 3 seeder is mounted on the harrow (equipped with a mechanical-pneumatic sowing system). The double-disc alternating self-cleaning coulters equipped with a packing-copying unit ensure uniform sowing on mosaic soils. Efficient land copying makes it possible to use this unit both on plains and hilly areas.
|
 |
|
KUHN Spray control in GPS sections for accurate spraying control by means of GPS and RINS ASSIST for rinsing control. These systems may constitute integral parts of a machine or controllers and do not require any additional equipment inside the cab.
|
 |
|
New generation of mechanical seeders INTEGRA 3003 i 4003. The INTEGRA seeders available in 3 and 4 m operating width are very popular with farmers, thanks to extremely accurate mechanical sowing system which makes it possible to sow fine seeds (doses from 1.5 kg/hectare - rape) and large seeds (doses up to 450 kg/hectare - pea, horse bean). Changing the sowing material from fine to large seeds and vice versa does not require any adjustments or mechanical interventions in the sowing systems. |
 |
|
METRIS field spraying machine - targeted at farms involved in plant or mixed production. The METRIS spraying machine is utilises solutions used in other KUHN hitched spraying machine models:
The EQUILIBRA field beam stabilisation system ensures full 3D shock absorption.
|
 |
|
PLANTER 3 seeder - sowing precision and a low seed falling point (below 10 cm) ensure extremely precise location of seeds in a row. The seeding system in the Planter seeder is adapted to a wide range of sowing materials, e.g. beetroots, rape, corn, sunflower or even courgette and mustard plant.
|
 |
|
New compact i-Bio compacting-wrapping machine of light design perfectly complements the KUHN range of products for harvesting fodder. The upper compacting chamber of the i-BIO light compacting-wrapping machine (weight 3495 kg) opens after the process of compacting and wrapping a given bale is completed. The tighteners on the hoop allow for wrapping the whole bale. The bale transfer stage has been eliminated thus the risk of changing its shape has been mitigated.
|
 |
|
KUHN ISOBUS communication system for fertilizer distributors, compacting and bale wrapping machines. The AXIS 50.1 W fertilizer distributors are equipped with weighing systems in the ISOBUS version with the CCI 100 terminal or in the version without the terminal compatible with the ISOBUS tractor terminal. Apart from the advantages of the standard fertilizer distributor version (capacity up to 500 kg/min, dose weighing and correction every second, operating width 50 m, very slowly rotating fine fertilizer mixer), the ISOBUS version of the AXIS 50.1 W is additionally equipped with: - 750 rpm transmission gear allowing for better adjustment of the machine to high-power tractors equipped only with a 1000 rpm power take-off shaft. Lower engine rpm value results in lower fuel consumption; - electronic control of raising/lowering the guard for border sowing (Telimat) monitored by control equipment. Variable-chamber balers, compacting-wrapping machines, high-pressure presses and, for the first time, wrappers for round and cubicoid bales may be controlled by the CCI terminal or ISOBUS tractor's terminal. A CCI terminal may be connected to a camera monitoring the bale wrapping or forming cycle in a high-pressure press. Numerous applications ensure smart machine operation management and control. The ISOBUS CCI terminal makes it possible to manage the operation of several KUHN machines equipped with the ISOBUS communication system or machines of other manufacturers belonging to the CCI association. This system limits the number of controllers installed in the tractor cab. The most important advantages of this system include ergonomics, possibility of uploading upgrades and a colourful touch-screen to operate additional functions.
|
 |
|
New feeding system in KUHN balers - taking into account the growing demands of agricultural machinery users, KUHN has developed a new feeding system with a lowered (drop-down) gatherer floor which is installed as a standard in all variable-chamber balers and VB compacting-wrapping balers with a rotor equipped with the OptiCut cutting unit, VB 2160 and VB 2190 with OptiFeed rotors and in the FB 2135 OptiCut 23 fixed-chamber balers and in the FBP 2135 fixed-chamber compacting-wrapping machines in the OptiCut 23 version.
|
 |
|
Striger cultivator for strip cultivation - offers the following advantages in the soil preparation process: - efficient soil heating in rows to ensure faster plant sprouting The product will be available in various versions: with a stiff or foldable frame. The standard spacing between the rows on 4 - 12 row versions is 45 – 80 cm.
|
 |
|
New PROFILE 470-670 models make forage wagons available for all farmsteads, regardless of the size and location of buildings. The new version of a forage wagon with vertical worms has a significantly compact design. The tank capacity is 4 m3 (model 470) and 6 m3 (model 670). Thanks to moving the axis behind the tank, the height of the smallest machine is only 2.08 m. A small diameter (1.69 m) of the mixing worm requires a tractor of power equal only to 40 HP!
|
|
|
LAZZARONI Lazzaroni F.lli designed a fresh milk dispenser with the highest level of reliability, safety, efficiency and ease of use, while complying with the hygienic, sanitary and environmental requirements. Lazzaroni dispensers were manufactured in accordance with the standards of the European Community and CE 2004/22 Metrology Directives. By installing these dispensers your milk will be sold directly without middlemen, and be available to customers 24 hours a day.
|
|
|
LEMKEN Compact-Solitair seeder with a rotating harrow - the 3,500 l tank ensures over three times higher capacity than the 3-metre combination of a rotating harrow with a seeder, thanks to which it achieves higher operational capacity in the field. One full dispenser makes it possible to sow wheat on the maximum area of 20 hectares. Large compacting tyres ensure fast and trouble-free transport for larger distances event with a tank filled to capacity and a 120 HP tractor. The Zirkon 10 rotating harrow shapes optimum growth both for conventional and simplified crops, regardless of soil conditions. The system is a perfect solution for heavy and variable characteristics soils. The Compact-Solitair machine with a rotating harrow ensures much more functions than units including feeders and disc tools with comparable fuel consumption and operating speed.
|
|
|
ŁUCZAK ECO-weeder EP-2 - 6 – a machine for plant care. A new generation – it destroys weeds mechanically eliminating the use of herbicides and the need of manual weeding (by the plants themselves in the row), spreads fertilizers secondarily (saltpetre spreading), stops effectively a ground water evaporation, replaces several persons during manual weeding in one row (e.g. a simultaneous weeding of 4 rows requires 40-50 persons but their work does not equal to weeding quality and soil aeration made by the machine).
|
 |
|
ŁUKOMET Greenhouse Robot Osza-3 – Before putting into production, the machine passed a number of heavy tests in several greenhouse farms where its huge advantages were confirmed.
|
|
|
MESCOMP Mescomp digital lost seed meter for harvester differs from the currently manufactured loss meters in that the beam placed behind the sieves or shakers, coupled with the onboard computer, registers the fall of each seed regardless of its size and humidity. Digital processing of the signal eliminates erroneous signals generated by chaff and small straw particles hitting the beam. The device does not require the past problematic calibration, it measures the harvester driving speed and displays precise losses in thousand seeds per hectare on a current basis. The digital loss meter should be additionally installed on high capacity harvesters operating in fields on rolling land or diversified soil, where factory installed, traditional loss meters fail.
|
 |
|
METALTECH Three-way tipping system agricultural trailers of DB professional line series – 2012 model. - complete diode lighting, since 2012 in standard version (clearance lamps and rear assembly lamps). - a system moving a spare tyre carrier beyond the trailer outline called a rotary spare tyre carrier – was patented at the request of ZM Metaltech. - the change of the image of agricultural trailers of DB series will distinguish the models leaving the factory in 2012, - tarpaulin hooks: not much complicated devices helpful when the tarpaulin is rolled up and unrolled. |
 |
|
A self-loading agricultural trailer ROTO 6 is designed to pick up fresh grass, grass for hay-silage, straw and hay. Thanks to the system of 23 cutting knives we obtain 5 cm long chaff during the work what is sufficient that the grass is pressed wee on the silo. On the other hand the feed made of chaff of such a length is suitable and willingly accepted by the livestock. The trailer, equipped with a hydraulically “broken” shaft, proves useful in work on the silo – a highly lifted pick-up does not obstruct when entering the pile. The control of all trailer mechanisms is carried out by means of hydraulic systems and these systems are controlled from an electronic panel located in the tractor cab. The trailer has a automatic unload system controlled by the sensor installed in the load body. Carrying capacity: 6t. Load body cubic capacity: 27m3 (cubic capacity resulting from the load body dimensions) Minimal HP of the tractor: 100
|
 |
|
Bale transport platform trailer type PB 16 HB. The trailer for bale transport of carrying capacity of 16t with an option of hydraulic arms (HB- hydraulic boards). Using this option we shorten the load and unload time therefore the work with a set equipped with such an option increases the output as well.
|
 |
|
M-ROL Automatic line for on-farm dry feed preparation (mixer, disintegrator, scales, suction divider, screw conveyor). From grain uptake, disintegration, premix addition, mixing through delivery to a specific spot, without human interference. Possible programming of all ingredients in one location (touch screen).
|
 |
|
OMARV CUNEO P: PROFESSIONAL FOLDING MOWER. Born to reduce the cutting time, the hydraulic folding machine CUNEO P is available in various sizes from 3.60 m to 6.40 m and represents an easy solution for road transport having a total width of 2.40 m. CUNEO P can be used to chop grass, small wood, and maize straws, and it can also be equipped with the TBC system, a small hydraulic mower attached on the back, that cuts the central residues left by the two rotors. SIDE MOWERS TORINO AND TORINO E. The model TORINO E with external gearbox is an evolution of the normal version TORINO (internal gearbox) and has a larger side displacement than this one. Thanks to its hydraulic system it can move on the side and can slant from -50° to +90°. Both models are versatile and very easy to use, and can be employed for the maintenance of road verges, banks, and flower beds. PROFESSIONAL MOWER COLLECTORS FIRENZE AND FIRENZE Q. Both models FIRENZE and FIRENZE Q (height unloading) are available in 3 dimensions: 1.60 m, 1.90 m, and 2.25 m and are indicated for the green areas maintenance - parks, sport fields, and gardens. Thanks to the collector they can cut and collect grass (even if high and wet) or small woods like pruning of fruit and olive trees, and vineyards (max Ø 5 cm).
|
|
|
PEDROTTI Digital system for drying process control in Pedrotti mobile driers - this novelty consists in modifying the previous control cabinet design by installing a digital system for controlling the seed drying process. This solution makes it possible to eliminate the analogue manometers previously used to set the drying temperatures and seed cooling time. The drying process parameters are set by accurate input of required drying temperatures and seed cooling process duration time.
|
 |
|
POM New Grubber U753L Huzar - Two-row Grubber U753L Huzar with spring or bolt protection is modernized U753 version. The news are levelling disks mounted on the roller arms, so adjusting working depth of disks, is simultaneously, automaticly with working depth coulters adjustng.There is possible to mount aftercrops seeder Vega with groowe distributors for small seeds.
|
 |
|
SAMASZ Disk mower KT 301SH – High operating speed, cutting strip PerfectCut of modern design, quick knives replacement, hydropneumatic pressure relief of the cutting edge, integrated transmission, modernized cutter, modern hydraulic fuse and three positions for transport – these are only a few of the advantages of the new disk mower of the KT series!
|
 |
|
SWIMER Mobile petrol tank made of polyethylene. The only one on the market, it has a lining protecting from explosion. An ideal and economical solution for companies, farmers, garden designers, foresters, contractors etc. A purer and safer alternative to the transportation of petrol in barrels for re-refueling equipment on the spot. Approved for road transport under the exemption in ADR 1.1.3.1c) Tank: -capacity 190 and 120 litres -single-wall -low center of gravity -built-in nozzle holder -antifoaming inlet -built-in vent -built-in forklift guides -level indicating stick Pump: - 4m hose reinforced with a steel spiral, dead weight approx. 25 kg |
|
|
TEJEET AI3070 – dual jet ejector sprayer:
Automatic setting in the body with the use of a hood with seal: 98579-1-NYR.
|
 |
|
The 750T Tip Flow Monitor utilizes individual flow sensors to monitor liquid flow at each tip across the width of a spray boom. An in-cab display and boom mounted LED alerts the operator to any spray tip that is operating beyond the acceptable flow range. This system is effective for detecting both high and low flow situations resulting from plugged, damaged or missing nozzles leading to enhanced productivity and greatly reduced likelihood of improper or ineffective chemical application. 1) Innovative Features:
2) Advantages/Applications: Practical applications for this technology include
|
|
|
TUBES INTERNATIONAL Manipulators – Monobloc 6/3 slide valves manually controlled via a lever with metal centering springs. Designed for hydraulic systems in cranes, elevators, building and agricultural machines, etc. Equipped as a standard with a safety valve and slides for dual action servomotors. Maximum number of operating sections: 6. Connectors BSP 3/8” (45 l/min) or ½” (60 l/min). Electrically controlled manipulators are also available.
|
 |
|
VÄDERSTAD Väderstad Tempo – single seed drill – sets out new standards for sowing accuracy at high speeds, contributing to achievement of results which could only be dreamt of till now. Novel dosing system ensures very high capacity and precision in any conditions. Power Shoot technology makes the machine insensitive to vibration and operation on slopes. The secret of this mechanism resides in precise control of seed movement along the whole way between the container and soil.
|
 |
|
Väderstad Spirit 400F – the unit for combined seeding and fertilizing – it is a new model of cultivation and seeding machine combining a possibility of simultaneous seeding and fertilizing. The machine was designed in such a way that the minimal HP of the tractor in relation to the basic model is not changed. The fertilizer dosing by means of FIX method – as this innovative system was called – is carried out with the help of cultivating discs. System Disc – it is an effective and productive way to place fertilizer precisely in the rows every 12,5 cm.
|
 |
|
Väderstad Carrier X – a mounted version of folded cultivation machine. A new model of Carrier machine, apart from that it cuts the stubble excellently, cuts the plant residue and consolidates the soil preventing it from humidity loss, it is easy to use and unusually efficient. An machine ability to cut the plant residue is achieved thanks to the use of the positioning of the discs in an X-shape – the machine becomes more stable. The lateral forces that act on such a type of constructions are eliminated because a part of the discs in one row is mounted in the opposite direction.
|
 |
|
VALTRA VALTRA proves that it is possible to increase work efficiency thanks to the use of new technologies and the most modern four-cylinder tractor. The most powerful model from the N series – N163 – obtains up to 700 Nm and 171 HP. The engines with an SCR technology allow to reduce fuel consumption by 5 to 10 %. After taking the AdBlue cost into consideration, the total net saving comes to about 5%! A completely new construction of the front of the N series tractors makes that the compact tractors are ideally suitable for the work with a front loader. Thanks to the modernization of the tractor’s front it was possible to obtain an even smaller return radius. New Models of T Series with an SCR System – The six-cylinder tractors with a characteristic engine located over an axle – T series – were equipped with an SCR technology. These are T133 and T153 tractors driven by a 6,6-litre AGCO Sisu Power engine and T163, T173, T193, T203 and T213 tractors driven by a 7,4-litre engine. The T163 models are tractors with a dual-range engine in which it is possible to select an Eco or Power operation mode with the help of a switch. The new tractors mean even more power and torque.
|
 |
|
ZASŁAW ZASŁAW™ monocoque trailer is a product designed for the toughest conditions in agriculture, particularly for clients with large farms. The trailer box was made of the highest grades of steel: sheet flooring – HARDOX 700MC (excellent quality steel, 5 mm thick), side walls – DOMEX 400MC (4 mm thick). Tapered box for easy unloading of clogging materials: front – 2,125 mm, rear: 2,200 mm. ZASŁAW ™ trailer was fitted with a sight glass at the front wall for controlling the loading of the trailer. The manufacturer offers two variants of the new monocoque trailer: 24 m³ and 33 m³. The standard capacity is 24 m³; it is possible to install box superstructure to the height of 600 mm, which increases the capacity to 33 m³.
|
|
|
ZETOR ZETOR – as the first one in the world – introduces HITCH TRONIC – a unique innovation that makes ploughing much more easier for a tractor’s operator. Zetor Hitch Tronic is an automatic control system of three-point hitch that was developed in cooperation with Bosch – Rexroth. This unique but simple solution ensures efficiency increase and work simplification regardless of an operator’s skills and soil density. Hitch Tronic is a new function of three-point hitch automatic control that automatically adjusts an EHR control to the current subsoil conditions. The tractor’s operator controls only ploughing depth. Hitch Trinic currently adjusts other work parameters to a current situation and corrects three-point hitch settings more often than it is done in case of classical control. All earlier EHR functions are kept in the tractors with Hitch Tronic systems therefore the tractor’s operator can select between a manual hydraulics adjustment and Hitch Trinic function. Hitch Tronic’s advantages:
|
 |
Soon more novelties!
